GearLite - Digital Video - Distribution and Monitoring

UMA-9017-R
SDI Universal Monitoring Amplifier with Reclocked Outputs
Highly flexible monitoring solution for SDI signals.
$545.00 USD

• 1 SDI input, 3 analog outputs
• YUV or RGB or (CVBS + YC)
• NTSC, PAL or PAL-N operation
• Excellent input equalization (> 250m)
• Clean, low noise output
• 10-bit DAC
• 8-bit processing
• Color bar test signal with valid SDI input
• 5V universal adapter with locking DC connector
• Normal or narrow VI length
• 3-year warranty

Serial Video Input
Number of Inputs:		1
Signal Standards Accomodated:		SMPTE 259M (conversion at 270Mb/s only)
Input Impedence:		75 ohm terminating
Input Return Loss:		>19dB to 270MHz
Equalization:		Automatic, up to 26dB (250m of Belden 8281 cable) @270Mb/s

Analog Monitoring Output
Number of Outputs:		3
Video:		Composite plus Y/C or RGB or YUV
Output Impedence:		75 ohm
Output Return Loss:		>45dB to 6MHz
Output Isolation:		>44dB to 6MHz
Signal Level:		See Manual
DC Offset for RGB or Composite Video:		<+/- 50mV
Frequency Response:		+/-0.25dB to 5MHz typically -1dB @ 5.75MHz
Differential Phase:		<1%
Differential Gain:		<1degree
Outputs Short Circuit Protected:		Yes
RMS Noise (unweighted):		-53dB 0 - 5.0MHz

Power Consumption
Required Voltage:		+5 V DC (5% regulation)
Power Consumption:		2.2W typical (425 mA)

Specifications and design are subject to change without notice.