RossGear - Converters

ADC-8033A - Leitch Compatible
ADC-8033A-S - Leitch Compatible
RGB / YUV Analog to SDI Converter
10-bit quality conversion of analog component signals into 270 Mb/s serial component 4:2:2 video.

• YUV input from Beta, MII and SMPTE/EBU formats
• All RGB formats supported
• 10-bit quantization
• 2x oversampling for excellent frequency response
• The ideal companion for the DAC-8013 D/A Converter
• On-board full frame synchronizer (ADC-8033-S version)
• Four serial outputs
• Automatic 525/625 line selection
• 5 year transferable warranty
• An interchangeable alternative to the Leitch ADC-6801 converter
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts 5.25

Component Analog Video Inputs
Signal Standards
RGB:		SMPTE/EBU MII NTSC-related
YUV:		BETA MII SMPTE/EBU
Note:With 525-line signals, any of the above can have setup
Input Impedence:		75 Ohm
Return Loss:		>40dB to 6MHz

Component 4:2:2 SDI Inputs
Signal Standards Accomodated:		SMPTE 259M-C, 270Mb/s 525/625 lines, 10 bits
Number of Outputs:		4
Output Return Loss:		>18dB to 270MHz
Signal Level DC Offset:		800mV +/-5%
Rise & Fall Time:		>800pS (20-80%, +/-15%)
Overshoot:		<10% typical

Serial Video Outputs
Number of Outputs:		4
Standard:		SMPTE 259M-C; 270Mb/s, 525/625 lines
Output Impedence:		75 Ohm
Output Return Loss:		>18dB to 300MHz
Signal Level:		800mV +/- 5%
DC Offset:		<30mV
Rise & Fall Time:		800pS (20-80%) +/-15%
Overshoot:		<8%

Performance
Luminance Frequency Response:		+/-0.03dB to 5.5MHz
Group Delay:		<5ns to 5.5MHz
RMS Noise (Lum Channel):		>60dB to 1.5MHz
RMS Noise (Chroma Channel):		>60dB to 1.5MHz
Electrical Length:		3us
Quantization:		10 bits

Other
Power Consumption:		4.7W

Specifications and design are subject to change without notice.