RossGear - Analog Video

The UDA-7005 and UDA-7500 are represented in the above flow diagram.

• 8 outputs
• Wide gain range of + 6dB to - 2dB
• Economical cost
• Also functions as a Pulse DA
• Low distortion
• Excellent technical specifications
• 5-year transferable warranty
• An alternate to the Leitch UDA-683
• Fits Ross 7000 series and Leitch 680 series frames

Input
Video Input Level:		1 V pp
Input Impedence:		75 Ohms bridging
Pulse Input Level:		2 V or 4 V pp
Input Return Loss:		46 dB to 5MHz

Outputs
Number of Outputs:		8
Output Impedence:		75 Ohm
Output Return Loss:		35dB to 5MHz
Output Isolation:		34dB to 5MHz
DC Offset:		<50mV
Output Loading per Termination at 10MHz:		0.01 dB +/-0.03 dB to 16MHz -0.1 dB at 14MHz

Coupling
Normal:		DC coupled
May be AC coupled by installing two capacitors

Performance
Gain Range:		+6 dB to -2 dB
Gain Stability:		<0.1% per 10 degrees C
Frequency Response:		+/- 0.05 dB to 10MHz typically -0.5 dB at 20MHz
Delay:		7.2 ns (9.3 degrees at 3.58MHz) (11.5 degrees at 4.43 MHz)
Bandwidth:		-3 dB 36MHz
Line Rate Window Tilt:		<0.2%
Field Rate Window Tilt:		<0.2%
50/60Hz Square Wave Tilt:		<0.1%
Bounce (black to white):		<0.1%
Differential Gain (10%-90% APL):		<0.1%
Differential Phase (10%-90% APL):		all outputs loaded: <0.1 degrees
RMS Noise 0-5MHz (unweighted):		68 dB
Chrominance/ Luminance Delay:		<2.0ns
K Rating 1 T:		0.3%

Others
Power Consumption:		1.5W

Specifications and design are subject to change without notice.