Quick Links
![]()
Downloads
Manual (PDF)
Catalog Page (PDF)
RossGear - Analog Video
VEA-7001A - Leitch Compatible
VEA-7502 - GVG Compatible
Video Equalizing Amplifier with Clamping
An eight output precision equalizing amplifier which can equalize up to 1,000 ft. (305m) of cable to an extremely high accuracy.
![]()
VEA-7001A - Leitch Compatible

The VEA-7001 and VEA-7502 are represented in the above flow diagram.
- Precision equalization of up to 305m (1,000 ft.) of coax cable
- 8 outputs
- Supports 8281, 1694 and 1505 cable in a single DA
- Easy to use, one control adaptive equalizer for fast installation
- Back porch clamping
- Clamping speed jumper-selectable
- Delay matched for precise interchangeability
- Delay adjustable if required
- Superb stability of frequency response and color timing
- Outstanding ground loop hum rejection
- Excellent isolation between outputs
- Power to each card is individually fused
- 5-year transferable warranty
- An interchangeable replacement to the Leitch VEA-681 and VEA-684
- Fits Ross 7000 series and Leitch 680 series frames
| Input | ||
| Video Input Level: | 1 V pp | |
| Input Impedence: | 75 Ohms bridging | |
| Input Return Loss: | 46dB to 5MHz | |
| Max Common Mode Signal: | 7V pp | |
| Common Mode Rejection: | 42 dB at 60Hz | |
| Max DC on Input: | +8 / -1 V | |
| Outputs | ||
| Number of Outputs: | 8 | |
| Output Impedence: | 75 Ohm | |
| Output Return Loss: | 38dB to 5MHz | |
| Output Isolation: | 38dB to 5MHz | |
| DC Offset: | <30MHz | |
| Output Loading per Termination at 10MHz: | 0.005dB +/-0.03 dB to 16MHz -0.1 dB at 14MHz |
|
| Equalization | ||
| Response Accuracy 0 to 500 feet: | +/-0.03 dB to 16MHz, -0.1 dB at 20MHz | |
| Response Accuracy 500 to 1000 feet: | +/-0.03 dB to 12MHz, -0.1 dB at 14MHz | |
| Response Stability 1000 feet: | 0.04 dB per 10 degrees C | |
| Clamping | ||
| Recovery TIme, Fast Mode: | 7 lines | |
| Hum Rejection, Normal Mode: | 6dB | |
| Hum Rejection, Fast Mode: | 38dB | |
| Performance | ||
| Gain Range: | +/- 3dB | |
| Gain Stability: | <0.005% per 10 degrees C | |
| Frequency Response: | +/- 0.02 dB to 10MHz typically 0.1 dB at 20MHz |
|
| Delay: | 25.4 ns (32.7 degrees at 3.58MHz) (40.5 degrees at 4.43 MHz) |
|
| Bandwidth: | -3 dB 41MHz | |
| Line Rate Window Tilt: | <0.2% | |
| Field Rate Window Tilt: | <0.2% | |
| 50/60Hz Square Wave Tilt: | <0.3% | |
| Bounce (black to white): | <0.3% | |
| Differential Gain (10%-90% APL): | <0.1% | |
| Differential Phase (10%-90% APL): | all outputs loaded: <0.1 degrees | |
| RMS Noise 0-5MHz (unweighted): | 73dB | |
| Chrominance/ Luminance Delay: | <2.0ns | |
| K Rating 1 T: | 0.3% | |
| Others | ||
| Power Consumption: | 2.5W | |
Specifications and design are subject to change without notice.
![]()
VEA-7502 - GVG Compatible

The VEA-7001 and VEA-7502 are represented in the above flow diagram.
- Precision equalization of up to 305m (1,000 ft.) of coax cable
- 8 outputs (6 output operation selectable for the VEA-7502)
- Available for many popular cable types
- Easy to use, one control adaptive equalizer for fast installation
- Sync Tip Restoration
- Clamping speed jumper-selectable
- Delay matched for precise interchangeability
- Delay adjustable if required
- Superb stability of frequency response and color timing
- Outstanding ground loop hum rejection
- Excellent isolation between outputs
- Power to each card is individually fused
- 5-year transferable warranty
- An alternative to the GVG 8502/8802
- Fits Ross 7500 series and GVG 8500/8800/8900 series
frames
| Input | ||
| Video Input Level: | 1 V pp | |
| Input Impedence: | 75 Ohms bridging | |
| Input Return Loss: | 46 dB to 5MHz (41 dB GVG* tray) | |
| Max Common Mode Signal: | 7V pp | |
| Common Mode Rejection: | 60 dB at 60 Hz | |
| Max DC on Input: | +8 / -1 V | |
| Outputs | ||
| Number of Outputs: | 8 | |
| Output Impedence: | 75 Ohm | |
| Output Return Loss: | 40dB to 5MHz | |
| Output Isolation: | 42dB to 5MHz | |
| DC Offset: | <50mV | |
| Output Loading per Termination at 10MHz: | 0.01 dB | |
| Equalization | ||
| Response Accuracy 0 to 1000 feet: | +/- 0.03 dB to 10MHz | |
| Coupling | ||
| Normal: | Sync tip restored, back porch at ground level | |
| AC: | AC coupled | |
| Performance | ||
| Gain Range: | +/- 3dB | |
| Gain Stability: | <0.1% per 10 degrees C | |
| Frequency Response: | +/- 0.02 dB to 10MHz typically -0.2 dB at 20MHz |
|
| Bandwidth: | -3 dB 36MHz | |
| Line Rate Window Tilt: | <0.2% | |
| Field Rate Window Tilt: | <0.2% | |
| 50/60Hz Square Wave Tilt: | <0.1% | |
| Bounce (black to white): | <0.5% | |
| Differential Gain (10%-90% APL): | <0.1% | |
| Differential Phase (10%-90% APL): | all outputs loaded: <0.1 degrees | |
| RMS Noise 0-5MHz (unweighted): | 68 dB | |
| Chrominance/ Luminance Delay: | <2.0ns | |
| K Rating 1 T: | 0.3% | |
| Others | ||
| Power Consumption: | 4.7W | |
Specifications and design are subject to change without notice.
Sub Navigation
¬ RossGear
¬ openGear
¬ GearLite
¬ GearLite MD